SP-3 is a data adquisition hardware and Software for upgrading old brake based dynamometers, eddy current, water brake, etc.
Brake torque is measured by a load cell in a free floating eddy current, water brake or any other power absorber.

Note: SP3 DOESN'T CONTROL THE BRAKE. BRAKE CONTROL MUST EXIST ON THE DYNO. For a brake controller system please refer to SP4 (click here)

Price: 1595

SmartPower SP-3 is a package that consists on:

SP-3 data acquisition unit, with 5 input channels:
  • roller speed input
  • engine rpm input
  • thermocouple type K input (upto 1000ºC)
  • general analog input
  • Load Cell input (Internal Load Cell amplifier)

    And sensors:
  • digital inductive pickup to measure roller rpm
  • capacitive pickup to measure engine rpm
  • Load Cell (range from 50 to 900 kg)
  • installation cables and SportDyno software


    Engine Dynamometer

    Old water brake or eddy current dynamometers updating: Stuska, Go Power, SuperFlow, DTS, Schenck, Froude, Hofmann, AVL, Borghi & Saveri, Heenan and Froude


    Roller dyno with friction brakes.

    Thrust Load Dynamometer testing  This allow you to operate the engine through its full range, and get maximum horsepower output.

    The computer collects static thrust data from transducers versus engine RPM.

    Last modified SEP/28/2009